Section: Linux Programmer's Manual (5)
Return to Main Contents
resolv.conf - resolver configuration file
is a set of routines in the C library
that provide access to the Internet Domain Name System (DNS).
The resolver configuration file contains information that is read
by the resolver routines the first time they are invoked by a process.
The file is designed to be human readable and contains a list of
keywords with values that provide various types of resolver information.
If this file does not exist,
only the name server on the local machine will be queried;
the domain name is determined from the hostname
and the domain search path is constructed from the domain name.
The different configuration options are:
- nameserver Name server IP address
Internet address of a name server that the resolver should query,
either an IPv4 address (in dot notation),
or an IPv6 address in colon (and possibly dot) notation as per RFC 2373.
(currently 3, see <resolv.h>) name servers may be listed,
one per keyword.
If there are multiple servers,
the resolver library queries them in the order listed.
If no nameserver entries are present,
the default is to use the name server on the local machine.
(The algorithm used is to try a name server, and if the query times out,
try the next, until out of name servers,
then repeat trying all the name servers
until a maximum number of retries are made.)
- domain Local domain name.
Most queries for names within this domain can use short names
relative to the local domain.
If set to '.', the root domain is considered.
If no domain entry is present, the domain is determined
from the local hostname returned by
the domain part is taken to be everything after the first '.'.
Finally, if the hostname does not contain a domain part, the root
domain is assumed.
- search Search list for host-name lookup.
The search list is normally determined from the local domain name;
by default, it contains only the local domain name.
This may be changed by listing the desired domain search path
following the search keyword with spaces or tabs separating
Resolver queries having fewer than
dots (default is 1) in them will be attempted using each component
of the search path in turn until a match is found.
For environments with multiple subdomains please read
below to avoid man-in-the-middle attacks and unnecessary
traffic for the root-dns-servers.
Note that this process may be slow and will generate a lot of network
traffic if the servers for the listed domains are not local,
and that queries will time out if no server is available
for one of the domains.
The search list is currently limited to six domains
with a total of 256 characters.
This option allows addresses returned by
to be sorted.
A sortlist is specified by IP-address-netmask pairs.
The netmask is
optional and defaults to the natural netmask of the net.
The IP address
and optional network pairs are separated by slashes.
Up to 10 pairs may
Here is an example:
sortlist 22.214.171.124/255.255.240.0 126.96.36.199
Options allows certain internal resolver variables to be modified.
The syntax is
options option ...
where option is one of the following:
(effective only if glibc was built with debug support; see
sets a threshold for the number of dots which
must appear in a name given to
before an initial absolute query will be made.
The default for
n is 1, meaning that if there are any dots in a name, the name
will be tried first as an absolute name before any search list
elements are appended to it.
The value for this option is silently capped to 15.
sets the amount of time the resolver will wait for a
response from a remote name server before retrying the
query via a different name server.
Measured in seconds,
the default is
(currently 5, see <resolv.h>).
The value for this option is silently capped to 30.
sets the number of times the resolver will send a
query to its name servers before giving up and returning
an error to the calling application.
The default is
(currently 2, see <resolv.h>).
The value for this option is silently capped to 5.
which causes round-robin selection of nameservers from among those listed.
This has the effect of spreading the query load among all listed servers,
rather than having all clients try the first listed server first every time.
which disables the modern BIND checking of incoming hostnames and
mail names for invalid characters such as underscore (_), non-ASCII,
or control characters.
This has the effect of trying a AAAA query before an A query inside the
function, and of mapping IPv4 responses in IPv6 "tunneled form"
if no AAAA records are found but an A record set exists.
Some programs behave strangely when this option is turned on.
- ip6-bytestring (since glibc 2.3.4)
This causes reverse IPv6 lookups to be made using the bit-label format
described in RFC 2673;
if this option is not set, then nibble format is used.
- ip6-dotint/no-ip6-dotint (since glibc 2.3.4)
When this option is clear
reverse IPv6 lookups are made in the (deprecated)
when this option is set
reverse IPv6 lookups are made in the
zone by default.
This option is set by default.
- edns0 (since glibc 2.6)
This enables support for the DNS extensions described in RFC 2671.
- single-request (since glibc 2.10)
By default, glibc performs IPv4 and IPv6 lookups in parallel since
Some appliance DNS servers
cannot handle these queries properly and make the requests time out.
This option disables the behavior and makes glibc perform the IPv6
and IPv4 requests sequentially (at the cost of some slowdown of the
- single-request-reopen (since glibc 2.9)
The resolver uses the same socket for the A and AAAA requests.
Some hardware mistakenly sends back only one reply.
When that happens the client system will sit and wait for the second reply.
Turning this option on changes this behavior
so that if two requests from the same port are not handled correctly it will
close the socket and open a new one before sending the second request.
The domain and search keywords are mutually exclusive.
If more than one instance of these keywords is present,
the last instance wins.
The search keyword of a system's resolv.conf file can be
overridden on a per-process basis by setting the environment variable
to a space-separated list of search domains.
The options keyword of a system's resolv.conf file can be
amended on a per-process basis by setting the environment variable
to a space-separated list of resolver options
as explained above under options.
The keyword and value must appear on a single line, and the keyword
(e.g., nameserver) must start the line.
The value follows the keyword, separated by white space.
Lines that contain a semicolon (;) or hash character (#)
in the first column are treated as comments.
Name Server Operations Guide for BIND
This page is part of release 3.54 of the Linux
A description of the project,
and information about reporting bugs,
can be found at
- SEE ALSO
This document was created by
using the manual pages.
Time: 04:23:08 GMT, January 22, 2018